1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 <?php
/**
* PHPMailer RFC821 SMTP email transport class.
* PHP Version 5
* @package PHPMailer
* @link https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
* @author Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
* @author Jim Jagielski (jimjag) <jimjag@gmail.com>
* @author Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
* @author Brent R. Matzelle (original founder)
* @copyright 2014 Marcus Bointon
* @copyright 2010 - 2012 Jim Jagielski
* @copyright 2004 - 2009 Andy Prevost
* @license http://www.gnu.org/copyleft/lesser.html GNU Lesser General Public License
* @note This program is distributed in the hope that it will be useful - WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE.
*/
/**
* PHPMailer RFC821 SMTP email transport class.
* Implements RFC 821 SMTP commands and provides some utility methods for sending mail to an SMTP server.
* @package PHPMailer
* @author Chris Ryan
* @author Marcus Bointon <phpmailer@synchromedia.co.uk>
*/
class SMTP
{
/**
* The PHPMailer SMTP version number.
* @var string
*/
const VERSION = '5.2.14';
/**
* SMTP line break constant.
* @var string
*/
const CRLF = "\r\n";
/**
* The SMTP port to use if one is not specified.
* @var integer
*/
const DEFAULT_SMTP_PORT = 25;
/**
* The maximum line length allowed by RFC 2822 section 2.1.1
* @var integer
*/
const MAX_LINE_LENGTH = 998;
/**
* Debug level for no output
*/
const DEBUG_OFF = 0;
/**
* Debug level to show client -> server messages
*/
const DEBUG_CLIENT = 1;
/**
* Debug level to show client -> server and server -> client messages
*/
const DEBUG_SERVER = 2;
/**
* Debug level to show connection status, client -> server and server -> client messages
*/
const DEBUG_CONNECTION = 3;
/**
* Debug level to show all messages
*/
const DEBUG_LOWLEVEL = 4;
/**
* The PHPMailer SMTP Version number.
* @var string
* @deprecated Use the `VERSION` constant instead
* @see SMTP::VERSION
*/
public $Version = '5.2.14';
/**
* SMTP server port number.
* @var integer
* @deprecated This is only ever used as a default value, so use the `DEFAULT_SMTP_PORT` constant instead
* @see SMTP::DEFAULT_SMTP_PORT
*/
public $SMTP_PORT = 25;
/**
* SMTP reply line ending.
* @var string
* @deprecated Use the `CRLF` constant instead
* @see SMTP::CRLF
*/
public $CRLF = "\r\n";
/**
* Debug output level.
* Options:
* * self::DEBUG_OFF (`0`) No debug output, default
* * self::DEBUG_CLIENT (`1`) Client commands
* * self::DEBUG_SERVER (`2`) Client commands and server responses
* * self::DEBUG_CONNECTION (`3`) As DEBUG_SERVER plus connection status
* * self::DEBUG_LOWLEVEL (`4`) Low-level data output, all messages
* @var integer
*/
public $do_debug = self::DEBUG_OFF;
/**
* How to handle debug output.
* Options:
* * `echo` Output plain-text as-is, appropriate for CLI
* * `html` Output escaped, line breaks converted to `<br>`, appropriate for browser output
* * `error_log` Output to error log as configured in php.ini
*
* Alternatively, you can provide a callable expecting two params: a message string and the debug level:
* <code>
* $smtp->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";};
* </code>
* @var string|callable
*/
public $Debugoutput = 'echo';
/**
* Whether to use VERP.
* @link http://en.wikipedia.org/wiki/Variable_envelope_return_path
* @link http://www.postfix.org/VERP_README.html Info on VERP
* @var boolean
*/
public $do_verp = false;
/**
* The timeout value for connection, in seconds.
* Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2
* This needs to be quite high to function correctly with hosts using greetdelay as an anti-spam measure.
* @link http://tools.ietf.org/html/rfc2821#section-4.5.3.2
* @var integer
*/
public $Timeout = 300;
/**
* How long to wait for commands to complete, in seconds.
* Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2
* @var integer
*/
public $Timelimit = 300;
/**
* The socket for the server connection.
* @var resource
*/
protected $smtp_conn;
/**
* Error information, if any, for the last SMTP command.
* @var array
*/
protected $error = array(
'error' => '',
'detail' => '',
'smtp_code' => '',
'smtp_code_ex' => ''
);
/**
* The reply the server sent to us for HELO.
* If null, no HELO string has yet been received.
* @var string|null
*/
protected $helo_rply = null;
/**
* The set of SMTP extensions sent in reply to EHLO command.
* Indexes of the array are extension names.
* Value at index 'HELO' or 'EHLO' (according to command that was sent)
* represents the server name. In case of HELO it is the only element of the array.
* Other values can be boolean TRUE or an array containing extension options.
* If null, no HELO/EHLO string has yet been received.
* @var array|null
*/
protected $server_caps = null;
/**
* The most recent reply received from the server.
* @var string
*/
protected $last_reply = '';
/**
* Output debugging info via a user-selected method.
* @see SMTP::$Debugoutput
* @see SMTP::$do_debug
* @param string $str Debug string to output
* @param integer $level The debug level of this message; see DEBUG_* constants
* @return void
*/
protected function edebug($str, $level = 0)
{
if ($level > $this->do_debug) {
return;
}
//Avoid clash with built-in function names
if (!in_array($this->Debugoutput, array('error_log', 'html', 'echo')) and is_callable($this->Debugoutput)) {
call_user_func($this->Debugoutput, $str, $this->do_debug);
return;
}
switch ($this->Debugoutput) {
case 'error_log':
//Don't output, just log
error_log($str);
break;
case 'html':
//Cleans up output a bit for a better looking, HTML-safe output
echo htmlentities(
preg_replace('/[\r\n]+/', '', $str),
ENT_QUOTES,
'UTF-8'
)
. "<br>\n";
break;
case 'echo':
default:
//Normalize line breaks
$str = preg_replace('/(\r\n|\r|\n)/ms', "\n", $str);
echo gmdate('Y-m-d H:i:s') . "\t" . str_replace(
"\n",
"\n \t ",
trim($str)
)."\n";
}
}
/**
* Connect to an SMTP server.
* @param string $host SMTP server IP or host name
* @param integer $port The port number to connect to
* @param integer $timeout How long to wait for the connection to open
* @param array $options An array of options for stream_context_create()
* @access public
* @return boolean
*/
public function connect($host, $port = null, $timeout = 30, $options = array())
{
static $streamok;
//This is enabled by default since 5.0.0 but some providers disable it
//Check this once and cache the result
if (is_null($streamok)) {
$streamok = function_exists('stream_socket_client');
}
// Clear errors to avoid confusion
$this->setError('');
// Make sure we are __not__ connected
if ($this->connected()) {
// Already connected, generate error
$this->setError('Already connected to a server');
return false;
}
if (empty($port)) {
$port = self::DEFAULT_SMTP_PORT;
}
// Connect to the SMTP server
$this->edebug(
"Connection: opening to $host:$port, timeout=$timeout, options=".var_export($options, true),
self::DEBUG_CONNECTION
);
$errno = 0;
$errstr = '';
if ($streamok) {
$socket_context = stream_context_create($options);
//Suppress errors; connection failures are handled at a higher level
$this->smtp_conn = @stream_socket_client(
$host . ":" . $port,
$errno,
$errstr,
$timeout,
STREAM_CLIENT_CONNECT,
$socket_context
);
} else {
//Fall back to fsockopen which should work in more places, but is missing some features
$this->edebug(
"Connection: stream_socket_client not available, falling back to fsockopen",
self::DEBUG_CONNECTION
);
$this->smtp_conn = fsockopen(
$host,
$port,
$errno,
$errstr,
$timeout
);
}
// Verify we connected properly
if (!is_resource($this->smtp_conn)) {
$this->setError(
'Failed to connect to server',
$errno,
$errstr
);
$this->edebug(
'SMTP ERROR: ' . $this->error['error']
. ": $errstr ($errno)",
self::DEBUG_CLIENT
);
return false;
}
$this->edebug('Connection: opened', self::DEBUG_CONNECTION);
// SMTP server can take longer to respond, give longer timeout for first read
// Windows does not have support for this timeout function
if (substr(PHP_OS, 0, 3) != 'WIN') {
$max = ini_get('max_execution_time');
// Don't bother if unlimited
if ($max != 0 && $timeout > $max) {
@set_time_limit($timeout);
}
stream_set_timeout($this->smtp_conn, $timeout, 0);
}
// Get any announcement
$announce = $this->get_lines();
$this->edebug('SERVER -> CLIENT: ' . $announce, self::DEBUG_SERVER);
return true;
}
/**
* Initiate a TLS (encrypted) session.
* @access public
* @return boolean
*/
public function startTLS()
{
if (!$this->sendCommand('STARTTLS', 'STARTTLS', 220)) {
return false;
}
// Begin encrypted connection
if (!stream_socket_enable_crypto(
$this->smtp_conn,
true,
STREAM_CRYPTO_METHOD_TLS_CLIENT
)) {
return false;
}
return true;
}
/**
* Perform SMTP authentication.
* Must be run after hello().
* @see hello()
* @param string $username The user name
* @param string $password The password
* @param string $authtype The auth type (PLAIN, LOGIN, NTLM, CRAM-MD5, XOAUTH2)
* @param string $realm The auth realm for NTLM
* @param string $workstation The auth workstation for NTLM
* @param null|OAuth $OAuth An optional OAuth instance (@see PHPMailerOAuth)
* @return bool True if successfully authenticated.* @access public
*/
public function authenticate(
$username,
$password,
$authtype = null,
$realm = '',
$workstation = '',
$OAuth = null
) {
if (!$this->server_caps) {
$this->setError('Authentication is not allowed before HELO/EHLO');
return false;
}
if (array_key_exists('EHLO', $this->server_caps)) {
// SMTP extensions are available. Let's try to find a proper authentication method
if (!array_key_exists('AUTH', $this->server_caps)) {
$this->setError('Authentication is not allowed at this stage');
// 'at this stage' means that auth may be allowed after the stage changes
// e.g. after STARTTLS
return false;
}
self::edebug('Auth method requested: ' . ($authtype ? $authtype : 'UNKNOWN'), self::DEBUG_LOWLEVEL);
self::edebug(
'Auth methods available on the server: ' . implode(',', $this->server_caps['AUTH']),
self::DEBUG_LOWLEVEL
);
if (empty($authtype)) {
foreach (array('LOGIN', 'CRAM-MD5', 'NTLM', 'PLAIN', 'XOAUTH2') as $method) {
if (in_array($method, $this->server_caps['AUTH'])) {
$authtype = $method;
break;
}
}
if (empty($authtype)) {
$this->setError('No supported authentication methods found');
return false;
}
self::edebug('Auth method selected: '.$authtype, self::DEBUG_LOWLEVEL);
}
if (!in_array($authtype, $this->server_caps['AUTH'])) {
$this->setError("The requested authentication method \"$authtype\" is not supported by the server");
return false;
}
} elseif (empty($authtype)) {
$authtype = 'LOGIN';
}
switch ($authtype) {
case 'PLAIN':
// Start authentication
if (!$this->sendCommand('AUTH', 'AUTH PLAIN', 334)) {
return false;
}
// Send encoded username and password
if (!$this->sendCommand(
'User & Password',
base64_encode("\0" . $username . "\0" . $password),
235
)
) {
return false;
}
break;
case 'LOGIN':
// Start authentication
if (!$this->sendCommand('AUTH', 'AUTH LOGIN', 334)) {
return false;
}
if (!$this->sendCommand("Username", base64_encode($username), 334)) {
return false;
}
if (!$this->sendCommand("Password", base64_encode($password), 235)) {
return false;
}
break;
case 'XOAUTH2':
//If the OAuth Instance is not set. Can be a case when PHPMailer is used
//instead of PHPMailerOAuth
if (is_null($OAuth)) {
return false;
}
$oauth = $OAuth->getOauth64();
// Start authentication
if (!$this->sendCommand('AUTH', 'AUTH XOAUTH2 ' . $oauth, 235)) {
return false;
}
break;
case 'NTLM':
/*
* ntlm_sasl_client.php
* Bundled with Permission
*
* How to telnet in windows:
* http://technet.microsoft.com/en-us/library/aa995718%28EXCHG.65%29.aspx
* PROTOCOL Docs http://curl.haxx.se/rfc/ntlm.html#ntlmSmtpAuthentication
*/
require_once 'extras/ntlm_sasl_client.php';
$temp = new stdClass;
$ntlm_client = new ntlm_sasl_client_class;
//Check that functions are available
if (!$ntlm_client->Initialize($temp)) {
$this->setError($temp->error);
$this->edebug(
'You need to enable some modules in your php.ini file: '
. $this->error['error'],
self::DEBUG_CLIENT
);
return false;
}
//msg1
$msg1 = $ntlm_client->TypeMsg1($realm, $workstation); //msg1
if (!$this->sendCommand(
'AUTH NTLM',
'AUTH NTLM ' . base64_encode($msg1),
334
)
) {
return false;
}
//Though 0 based, there is a white space after the 3 digit number
//msg2
$challenge = substr($this->last_reply, 3);
$challenge = base64_decode($challenge);
$ntlm_res = $ntlm_client->NTLMResponse(
substr($challenge, 24, 8),
$password
);
//msg3
$msg3 = $ntlm_client->TypeMsg3(
$ntlm_res,
$username,
$realm,
$workstation
);
// send encoded username
return $this->sendCommand('Username', base64_encode($msg3), 235);
case 'CRAM-MD5':
// Start authentication
if (!$this->sendCommand('AUTH CRAM-MD5', 'AUTH CRAM-MD5', 334)) {
return false;
}
// Get the challenge
$challenge = base64_decode(substr($this->last_reply, 4));
// Build the response
$response = $username . ' ' . $this->hmac($challenge, $password);
// send encoded credentials
return $this->sendCommand('Username', base64_encode($response), 235);
default:
$this->setError("Authentication method \"$authtype\" is not supported");
return false;
}
return true;
}
/**
* Calculate an MD5 HMAC hash.
* Works like hash_hmac('md5', $data, $key)
* in case that function is not available
* @param string $data The data to hash
* @param string $key The key to hash with
* @access protected
* @return string
*/
protected function hmac($data, $key)
{
if (function_exists('hash_hmac')) {
return hash_hmac('md5', $data, $key);
}
// The following borrowed from
// http://php.net/manual/en/function.mhash.php#27225
// RFC 2104 HMAC implementation for php.
// Creates an md5 HMAC.
// Eliminates the need to install mhash to compute a HMAC
// by Lance Rushing
$bytelen = 64; // byte length for md5
if (strlen($key) > $bytelen) {
$key = pack('H*', md5($key));
}
$key = str_pad($key, $bytelen, chr(0x00));
$ipad = str_pad('', $bytelen, chr(0x36));
$opad = str_pad('', $bytelen, chr(0x5c));
$k_ipad = $key ^ $ipad;
$k_opad = $key ^ $opad;
return md5($k_opad . pack('H*', md5($k_ipad . $data)));
}
/**
* Check connection state.
* @access public
* @return boolean True if connected.
*/
public function connected()
{
if (is_resource($this->smtp_conn)) {
$sock_status = stream_get_meta_data($this->smtp_conn);
if ($sock_status['eof']) {
// The socket is valid but we are not connected
$this->edebug(
'SMTP NOTICE: EOF caught while checking if connected',
self::DEBUG_CLIENT
);
$this->close();
return false;
}
return true; // everything looks good
}
return false;
}
/**
* Close the socket and clean up the state of the class.
* Don't use this function without first trying to use QUIT.
* @see quit()
* @access public
* @return void
*/
public function close()
{
$this->setError('');
$this->server_caps = null;
$this->helo_rply = null;
if (is_resource($this->smtp_conn)) {
// close the connection and cleanup
fclose($this->smtp_conn);
$this->smtp_conn = null; //Makes for cleaner serialization
$this->edebug('Connection: closed', self::DEBUG_CONNECTION);
}
}
/**
* Send an SMTP DATA command.
* Issues a data command and sends the msg_data to the server,
* finializing the mail transaction. $msg_data is the message
* that is to be send with the headers. Each header needs to be
* on a single line followed by a <CRLF> with the message headers
* and the message body being separated by and additional <CRLF>.
* Implements rfc 821: DATA <CRLF>
* @param string $msg_data Message data to send
* @access public
* @return boolean
*/
public function data($msg_data)
{
//This will use the standard timelimit
if (!$this->sendCommand('DATA', 'DATA', 354)) {
return false;
}
/* The server is ready to accept data!
* According to rfc821 we should not send more than 1000 characters on a single line (including the CRLF)
* so we will break the data up into lines by \r and/or \n then if needed we will break each of those into
* smaller lines to fit within the limit.
* We will also look for lines that start with a '.' and prepend an additional '.'.
* NOTE: this does not count towards line-length limit.
*/
// Normalize line breaks before exploding
$lines = explode("\n", str_replace(array("\r\n", "\r"), "\n", $msg_data));
/* To distinguish between a complete RFC822 message and a plain message body, we check if the first field
* of the first line (':' separated) does not contain a space then it _should_ be a header and we will
* process all lines before a blank line as headers.
*/
$field = substr($lines[0], 0, strpos($lines[0], ':'));
$in_headers = false;
if (!empty($field) && strpos($field, ' ') === false) {
$in_headers = true;
}
foreach ($lines as $line) {
$lines_out = array();
if ($in_headers and $line == '') {
$in_headers = false;
}
//Break this line up into several smaller lines if it's too long
//Micro-optimisation: isset($str[$len]) is faster than (strlen($str) > $len),
while (isset($line[self::MAX_LINE_LENGTH])) {
//Working backwards, try to find a space within the last MAX_LINE_LENGTH chars of the line to break on
//so as to avoid breaking in the middle of a word
$pos = strrpos(substr($line, 0, self::MAX_LINE_LENGTH), ' ');
//Deliberately matches both false and 0
if (!$pos) {
//No nice break found, add a hard break
$pos = self::MAX_LINE_LENGTH - 1;
$lines_out[] = substr($line, 0, $pos);
$line = substr($line, $pos);
} else {
//Break at the found point
$lines_out[] = substr($line, 0, $pos);
//Move along by the amount we dealt with
$line = substr($line, $pos + 1);
}
//If processing headers add a LWSP-char to the front of new line RFC822 section 3.1.1
if ($in_headers) {
$line = "\t" . $line;
}
}
$lines_out[] = $line;
//Send the lines to the server
foreach ($lines_out as $line_out) {
//RFC2821 section 4.5.2
if (!empty($line_out) and $line_out[0] == '.') {
$line_out = '.' . $line_out;
}
$this->client_send($line_out . self::CRLF);
}
}
//Message data has been sent, complete the command
//Increase timelimit for end of DATA command
$savetimelimit = $this->Timelimit;
$this->Timelimit = $this->Timelimit * 2;
$result = $this->sendCommand('DATA END', '.', 250);
//Restore timelimit
$this->Timelimit = $savetimelimit;
return $result;
}
/**
* Send an SMTP HELO or EHLO command.
* Used to identify the sending server to the receiving server.
* This makes sure that client and server are in a known state.
* Implements RFC 821: HELO <SP> <domain> <CRLF>
* and RFC 2821 EHLO.
* @param string $host The host name or IP to connect to
* @access public
* @return boolean
*/
public function hello($host = '')
{
//Try extended hello first (RFC 2821)
return (boolean)($this->sendHello('EHLO', $host) or $this->sendHello('HELO', $host));
}
/**
* Send an SMTP HELO or EHLO command.
* Low-level implementation used by hello()
* @see hello()
* @param string $hello The HELO string
* @param string $host The hostname to say we are
* @access protected
* @return boolean
*/
protected function sendHello($hello, $host)
{
$noerror = $this->sendCommand($hello, $hello . ' ' . $host, 250);
$this->helo_rply = $this->last_reply;
if ($noerror) {
$this->parseHelloFields($hello);
} else {
$this->server_caps = null;
}
return $noerror;
}
/**
* Parse a reply to HELO/EHLO command to discover server extensions.
* In case of HELO, the only parameter that can be discovered is a server name.
* @access protected
* @param string $type - 'HELO' or 'EHLO'
*/
protected function parseHelloFields($type)
{
$this->server_caps = array();
$lines = explode("\n", $this->last_reply);
foreach ($lines as $n => $s) {
//First 4 chars contain response code followed by - or space
$s = trim(substr($s, 4));
if (empty($s)) {
continue;
}
$fields = explode(' ', $s);
if (!empty($fields)) {
if (!$n) {
$name = $type;
$fields = $fields[0];
} else {
$name = array_shift($fields);
switch ($name) {
case 'SIZE':
$fields = ($fields ? $fields[0] : 0);
break;
case 'AUTH':
if (!is_array($fields)) {
$fields = array();
}
break;
default:
$fields = true;
}
}
$this->server_caps[$name] = $fields;
}
}
}
/**
* Send an SMTP MAIL command.
* Starts a mail transaction from the email address specified in
* $from. Returns true if successful or false otherwise. If True
* the mail transaction is started and then one or more recipient
* commands may be called followed by a data command.
* Implements rfc 821: MAIL <SP> FROM:<reverse-path> <CRLF>
* @param string $from Source address of this message
* @access public
* @return boolean
*/
public function mail($from)
{
$useVerp = ($this->do_verp ? ' XVERP' : '');
return $this->sendCommand(
'MAIL FROM',
'MAIL FROM:<' . $from . '>' . $useVerp,
250
);
}
/**
* Send an SMTP QUIT command.
* Closes the socket if there is no error or the $close_on_error argument is true.
* Implements from rfc 821: QUIT <CRLF>
* @param boolean $close_on_error Should the connection close if an error occurs?
* @access public
* @return boolean
*/
public function quit($close_on_error = true)
{
$noerror = $this->sendCommand('QUIT', 'QUIT', 221);
$err = $this->error; //Save any error
if ($noerror or $close_on_error) {
$this->close();
$this->error = $err; //Restore any error from the quit command
}
return $noerror;
}
/**
* Send an SMTP RCPT command.
* Sets the TO argument to $toaddr.
* Returns true if the recipient was accepted false if it was rejected.
* Implements from rfc 821: RCPT <SP> TO:<forward-path> <CRLF>
* @param string $address The address the message is being sent to
* @access public
* @return boolean
*/
public function recipient($address)
{
return $this->sendCommand(
'RCPT TO',
'RCPT TO:<' . $address . '>',
array(250, 251)
);
}
/**
* Send an SMTP RSET command.
* Abort any transaction that is currently in progress.
* Implements rfc 821: RSET <CRLF>
* @access public
* @return boolean True on success.
*/
public function reset()
{
return $this->sendCommand('RSET', 'RSET', 250);
}
/**
* Send a command to an SMTP server and check its return code.
* @param string $command The command name - not sent to the server
* @param string $commandstring The actual command to send
* @param integer|array $expect One or more expected integer success codes
* @access protected
* @return boolean True on success.
*/
protected function sendCommand($command, $commandstring, $expect)
{
if (!$this->connected()) {
$this->setError("Called $command without being connected");
return false;
}
//Reject line breaks in all commands
if (strpos($commandstring, "\n") !== false or strpos($commandstring, "\r") !== false) {
$this->setError("Command '$command' contained line breaks");
return false;
}
$this->client_send($commandstring . self::CRLF);
$this->last_reply = $this->get_lines();
// Fetch SMTP code and possible error code explanation
$matches = array();
if (preg_match("/^([0-9]{3})[ -](?:([0-9]\\.[0-9]\\.[0-9]) )?/", $this->last_reply, $matches)) {
$code = $matches[1];
$code_ex = (count($matches) > 2 ? $matches[2] : null);
// Cut off error code from each response line
$detail = preg_replace(
"/{$code}[ -]".($code_ex ? str_replace('.', '\\.', $code_ex).' ' : '')."/m",
'',
$this->last_reply
);
} else {
// Fall back to simple parsing if regex fails
$code = substr($this->last_reply, 0, 3);
$code_ex = null;
$detail = substr($this->last_reply, 4);
}
$this->edebug('SERVER -> CLIENT: ' . $this->last_reply, self::DEBUG_SERVER);
if (!in_array($code, (array)$expect)) {
$this->setError(
"$command command failed",
$detail,
$code,
$code_ex
);
$this->edebug(
'SMTP ERROR: ' . $this->error['error'] . ': ' . $this->last_reply,
self::DEBUG_CLIENT
);
return false;
}
$this->setError('');
return true;
}
/**
* Send an SMTP SAML command.
* Starts a mail transaction from the email address specified in $from.
* Returns true if successful or false otherwise. If True
* the mail transaction is started and then one or more recipient
* commands may be called followed by a data command. This command
* will send the message to the users terminal if they are logged
* in and send them an email.
* Implements rfc 821: SAML <SP> FROM:<reverse-path> <CRLF>
* @param string $from The address the message is from
* @access public
* @return boolean
*/
public function sendAndMail($from)
{
return $this->sendCommand('SAML', "SAML FROM:$from", 250);
}
/**
* Send an SMTP VRFY command.
* @param string $name The name to verify
* @access public
* @return boolean
*/
public function verify($name)
{
return $this->sendCommand('VRFY', "VRFY $name", array(250, 251));
}
/**
* Send an SMTP NOOP command.
* Used to keep keep-alives alive, doesn't actually do anything
* @access public
* @return boolean
*/
public function noop()
{
return $this->sendCommand('NOOP', 'NOOP', 250);
}
/**
* Send an SMTP TURN command.
* This is an optional command for SMTP that this class does not support.
* This method is here to make the RFC821 Definition complete for this class
* and _may_ be implemented in future
* Implements from rfc 821: TURN <CRLF>
* @access public
* @return boolean
*/
public function turn()
{
$this->setError('The SMTP TURN command is not implemented');
$this->edebug('SMTP NOTICE: ' . $this->error['error'], self::DEBUG_CLIENT);
return false;
}
/**
* Send raw data to the server.
* @param string $data The data to send
* @access public
* @return integer|boolean The number of bytes sent to the server or false on error
*/
public function client_send($data)
{
$this->edebug("CLIENT -> SERVER: $data", self::DEBUG_CLIENT);
return fwrite($this->smtp_conn, $data);
}
/**
* Get the latest error.
* @access public
* @return array
*/
public function getError()
{
return $this->error;
}
/**
* Get SMTP extensions available on the server
* @access public
* @return array|null
*/
public function getServerExtList()
{
return $this->server_caps;
}
/**
* A multipurpose method
* The method works in three ways, dependent on argument value and current state
* 1. HELO/EHLO was not sent - returns null and set up $this->error
* 2. HELO was sent
* $name = 'HELO': returns server name
* $name = 'EHLO': returns boolean false
* $name = any string: returns null and set up $this->error
* 3. EHLO was sent
* $name = 'HELO'|'EHLO': returns server name
* $name = any string: if extension $name exists, returns boolean True
* or its options. Otherwise returns boolean False
* In other words, one can use this method to detect 3 conditions:
* - null returned: handshake was not or we don't know about ext (refer to $this->error)
* - false returned: the requested feature exactly not exists
* - positive value returned: the requested feature exists
* @param string $name Name of SMTP extension or 'HELO'|'EHLO'
* @return mixed
*/
public function getServerExt($name)
{
if (!$this->server_caps) {
$this->setError('No HELO/EHLO was sent');
return null;
}
// the tight logic knot ;)
if (!array_key_exists($name, $this->server_caps)) {
if ($name == 'HELO') {
return $this->server_caps['EHLO'];
}
if ($name == 'EHLO' || array_key_exists('EHLO', $this->server_caps)) {
return false;
}
$this->setError('HELO handshake was used. Client knows nothing about server extensions');
return null;
}
return $this->server_caps[$name];
}
/**
* Get the last reply from the server.
* @access public
* @return string
*/
public function getLastReply()
{
return $this->last_reply;
}
/**
* Read the SMTP server's response.
* Either before eof or socket timeout occurs on the operation.
* With SMTP we can tell if we have more lines to read if the
* 4th character is '-' symbol. If it is a space then we don't
* need to read anything else.
* @access protected
* @return string
*/
protected function get_lines()
{
// If the connection is bad, give up straight away
if (!is_resource($this->smtp_conn)) {
return '';
}
$data = '';
$endtime = 0;
stream_set_timeout($this->smtp_conn, $this->Timeout);
if ($this->Timelimit > 0) {
$endtime = time() + $this->Timelimit;
}
while (is_resource($this->smtp_conn) && !feof($this->smtp_conn)) {
$str = @fgets($this->smtp_conn, 515);
$this->edebug("SMTP -> get_lines(): \$data is \"$data\"", self::DEBUG_LOWLEVEL);
$this->edebug("SMTP -> get_lines(): \$str is \"$str\"", self::DEBUG_LOWLEVEL);
$data .= $str;
// If 4th character is a space, we are done reading, break the loop, micro-optimisation over strlen
if ((isset($str[3]) and $str[3] == ' ')) {
break;
}
// Timed-out? Log and break
$info = stream_get_meta_data($this->smtp_conn);
if ($info['timed_out']) {
$this->edebug(
'SMTP -> get_lines(): timed-out (' . $this->Timeout . ' sec)',
self::DEBUG_LOWLEVEL
);
break;
}
// Now check if reads took too long
if ($endtime and time() > $endtime) {
$this->edebug(
'SMTP -> get_lines(): timelimit reached ('.
$this->Timelimit . ' sec)',
self::DEBUG_LOWLEVEL
);
break;
}
}
return $data;
}
/**
* Enable or disable VERP address generation.
* @param boolean $enabled
*/
public function setVerp($enabled = false)
{
$this->do_verp = $enabled;
}
/**
* Get VERP address generation mode.
* @return boolean
*/
public function getVerp()
{
return $this->do_verp;
}
/**
* Set error messages and codes.
* @param string $message The error message
* @param string $detail Further detail on the error
* @param string $smtp_code An associated SMTP error code
* @param string $smtp_code_ex Extended SMTP code
*/
protected function setError($message, $detail = '', $smtp_code = '', $smtp_code_ex = '')
{
$this->error = array(
'error' => $message,
'detail' => $detail,
'smtp_code' => $smtp_code,
'smtp_code_ex' => $smtp_code_ex
);
}
/**
* Set debug output method.
* @param string|callable $method The name of the mechanism to use for debugging output, or a callable to handle it.
*/
public function setDebugOutput($method = 'echo')
{
$this->Debugoutput = $method;
}
/**
* Get debug output method.
* @return string
*/
public function getDebugOutput()
{
return $this->Debugoutput;
}
/**
* Set debug output level.
* @param integer $level
*/
public function setDebugLevel($level = 0)
{
$this->do_debug = $level;
}
/**
* Get debug output level.
* @return integer
*/
public function getDebugLevel()
{
return $this->do_debug;
}
/**
* Set SMTP timeout.
* @param integer $timeout
*/
public function setTimeout($timeout = 0)
{
$this->Timeout = $timeout;
}
/**
* Get SMTP timeout.
* @return integer
*/
public function getTimeout()
{
return $this->Timeout;
}
}